PT-RQ25K Series
| Projector type | 3-Chip DLP™ projector | |
|---|---|---|
| DLP™ chip | ||
| Panel size | 20.3 mm (0.8 in) diagonal (16:10 aspect ratio) | |
| Display method | DLP™ chip x 3, DLP™ projection system | |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) x 3 | |
| Light source | Laser diode | |
| Light output1, 2 | 20,000 lm / 21,000 lm (Center)3 | |
| Time until light output declines to 50 %4 | 20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) | |
| Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) | WUXGA (1920 x 1200 pixels) |
| Contrast ratio2 | 25,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 1.78–25.40 m (70–1000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/D3LEW200 |
|
| Center-to-corner zone ratio2 | 90 % | |
| Lens | Optional (no lens included with this model) | |
| Lens shift (From the origin point of the lens mounter) |
||
| Vertical | ±66 % (52 % with ET-D75LE6/ET-D3LEW60, +71 % / +93 % with ET-D75LE95, ±66 % with ET-D3LEU100, ±57 % with ET-D3LEW200) (powered) |
|
| Horizontal | ±24 % (18 % with ET-D75LE6/ET-D3LEW60, ±14 % with ET-D75LE95, -25 % / +30 % with ET-D3LEU100, ±18 % with ET-D3LEW200) (powered) |
|
| Keystone correction range | Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95), Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| HDMI IN | HDMI x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input5) | |
| DisplayPort™ | DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input5) | |
| MULTI PROJECTOR SYNC IN |
BNC x 1 | — |
| MULTI PROJECTOR SYNC OUT |
BNC x 1 | — |
| MULTI PROJECTOR SYNC IN/ 3D SYNC 1 IN/OUT (dual purpose) |
— | BNC x 1 |
| MULTI PROJECTOR SYNC OUT/ 3D SYNC 2 OUT (dual purpose) |
— | BNC x 1 |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory | |
| DC OUT | USB Type A x 1 (for power supply, DC 5 V, 2 A) | |
| Expansion slot | Open slot for for function boards, Intel® SDM compatible | |
| Power supply | AC 100 V–120 V / AC 200 V–240 V, 50 Hz/60 Hz (The maximum value of light output is limited to 15,000 lm or less when using the projector with AC 100 V to AC 120 V. Other limitations apply6.) |
|
| Maximum power consumption7 | AC 200 V–AC 240 V : 1,490 W (1,520 VA) AC 100 V–AC 120 V : 1,080 W (1,090 VA) |
AC 200 V–AC 240 V : 1,470 W (1,520 VA) AC 100 V–AC 120 V : 1,060 W (1,090 VA) |
| On-mode power consumption (Operating mode)7 |
|
|
| Cabinet materials | Molded plastic | |
| Operation noise2 | 46 dB (NORMAL/QUIET), 43 dB (ECO) | |
| Dimensions (W x H x D) |
Approx. 550 x 220 x 570 mm (21 5/8˝ x 8 11/16˝ x 22 7/16˝ ) (not including protruding parts) | |
| Weight8 | Approx. 35 kg (77.2 lbs) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F9), operating humidity: 10–80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™ |
|