PT-RCQ10 Series – PRO LAB

Visit Website

REQUEST A QUOTE

Projector type	1-Chip DLP™ projector	1-Chip DLP™ projector
DLP™ chip
Panel size	17.0 mm (0.67 in) diagonal, 16:10 aspect ratio	17.0 mm (0.67 in) diagonal, 16:10 aspect ratio
Display method	DLP™ chip x 1, DLP™ projection system	DLP™ chip x 1, DLP™ projection system
Number of pixels	2,304,000 (1920 x 1200) pixels	2,304,000 (1920 x 1200) pixels
Light source	Laser diodes	Laser diodes
Light output	10,000 lm^1 / 10,500 lm (Center)^2	8,000 lm^1 / 8,400 lm (Center)^2
Time until light output declines to 50 %^*3	20,000 hours (NORMAL) / 24,000 hours (ECO)	20,000 hours (NORMAL) / 24,000 hours (ECO)
Resolution	4,608,000 pixels / 2715 x 1697 dots * With Smooth Pixel Drive: ON.	4,608,000 pixels / 2715 x 1697 dots * With Smooth Pixel Drive: ON.
Contrast ratio^*1	10,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3].	10,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3].
Screen size (diagonal)	1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio	1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio
Center-to-corner zone ratio^*1	90 %	90 %
Lens	PT-RCQ10: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm PT-RCQ10L: Optional powered zoom/focus lenses	PT-RCQ80: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm PT-RCQ80L: Optional powered zoom/focus lenses
Lens shift^*4
Vertical (from center of screen)	+50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered)	+50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered)
Horizontal (from center of screen)	+30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered)	+30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered)
Keystone correction range	Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035), Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020)	Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035), Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020)
Keystone correction range with optional ET-UK20 Upgrade Kit	Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055), Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055), When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.	Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055), Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055), When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.
Installation	Ceiling/floor, front/rear, free 360-degree installation	Ceiling/floor, front/rear, free 360-degree installation
Terminals
SDI IN	BNC x 1: 3G/HD-SDI input	BNC x 1: 3G/HD-SDI input
HDMI IN	HDMI 19-pin x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input^*5)	HDMI 19-pin x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input^*5)
DVI-D IN	DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)	DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
MULTI PROJECTOR SYNC IN	BNC x 1	BNC x 1
MULTI PROJECTOR SYNC OUT	BNC x 1	BNC x 1
SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT	D-sub 9-pin (male) x 1 for link control	D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN	M3 x 1 for wired remote control	M3 x 1 for wired remote control
REMOTE 1 OUT	M3 x 1 for link control (for wired remote control)	M3 x 1 for link control (for wired remote control)
REMOTE 2 IN	D-sub 9-pin (female) x 1 for external control (parallel)	D-sub 9-pin (female) x 1 for external control (parallel)
LAN	RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (Class 2), Art-Net	RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (Class 2), Art-Net
DIGITAL LINK	RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input^*5	RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input^*5
USB	USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA)	USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA)
Expansion Slot	Open slot for SLOT NX compatible interface board	Open slot for SLOT NX compatible interface board
Power supply	AC 100–240 V, 50/60 Hz	AC 100–240 V, 50/60 Hz
Maximum power consumption	1,100 W (1,110 VA) (0.5 W with Standby Mode set to ECO, 8 W with Standby Mode set to NORMAL)	880 W (890 VA) (0.5 W with Standby Mode set to ECO, 8 W with Standby Mode set to NORMAL)
On-mode power consumption (Operating mode)	[NORMAL] 990 W [ECO] 780 W	[NORMAL] 770 W [ECO] 590 W
Cabinet materials	Molded plastic	Molded plastic
Operation noise^*1	43 dB (Normal)/40 dB (Quiet 1)/38 dB (Quiet 2)	40 dB (Normal)/38 dB (Quiet)
Dimensions (W x H x D)	PT-RCQ10: 498 x 200^6 x 581 mm (19 19/32˝ x 7 7/8˝ ^6 x 22 7/8˝ ) (with supplied lens) PT-RCQ10L: 498 x 200^6 x 538 mm (19 19/32˝ x 7 7/8˝ ^6 x 21 3/16˝ ) (without lens)	PT-RCQ80: 498 x 200^6 x 581 mm (19 19/32˝ x 7 7/8˝ ^6 x 22 7/8˝ ) (with supplied lens) PT-RCQ80L: 498 x 200^6 x 538 mm (19 19/32˝ x 7 7/8˝ ^6 x 21 3/16˝ ) (without lens)