CX112B

The CX112B is a large diaphragm condenser microphone with a contemporary design and excellent performance characteristics. It is an exceptional tool for professional audio production, project studios and live stage performances. Delivering a smooth, uniform frequency response from 20 Hz – 20 kHz, the CX112B offers a rich, full bodied sound delivered by its 35 mm capsule. The CX112B is equipped with a bass roll-off filter to help eliminate rumble in the lower frequencies and a -10 dB pad for use in higher SPL up to 145 dB. Applications would include a wide variety of acoustic instruments, vocals, string sections, guitar, ensembles, guitar cabinets and ambient room miking. Designed with low noise preamp circuitry, the CX112B operates on phantom power. For optimum results, the CX112B should be used with a high quality mic preamplifier and microphone cable.

SPECIFICATIONS

Transducer Type Condenser

Frequency Response 20 Hz – 20 kHz

Polar Pattern Cardioid

Output Impedance 120 ohms

Sensitivity 18 mV / Pa @ 1k

Capsule Technology 27.5 mm / 1.08 in GV Diaphragm

Equivalent Noise Level 15 dB (A-weighted)

Signal to Noise Ratio 79 dB

Maximum SPL ≥135 dB / ≥145 dB with Pad

Dynamic Range 120 dB

Power Requirements 48 V phantom

Connector 3-pin XLRm

Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector

Materials / Finish Aluminum & Zinc Alloy / Black

Weight 340 g / 12 oz

Length 165 mm / 6.5 in