The ATS1, ATS1LX and ATS1LP are the industry’s only programmable, shock absorbent table stands with an LED indicator that does not require external power supplies, eliminating the added expense and complication associated with installation and wiring. The LED indicator and audio switching circuitry operate on the same phantom power source supplied to the microphone. The result is simplified installation and reliable operation. The base has programmable functions that are changed with a simple, intuitive dip switch which can be set to operate in Toggle On, Toggle Off, Momentary Talk and Momentary Mute modes. Also supplied within the base is a Low Cut Filter offering additional protection from bass frequencies that may cause rumble or hum. The ATS1LX and ATS1LP can be further programmed to operate seamlessly with automated teleconferencing and switch systems in external logic control mode. The ATS is manufactured with a precision die cast zinc alloy base, durable black E-coat finish, LED indicators and a noise free mechanical switch.
SPECIFICATIONS
ATS10 |
ATS1 |
ATS1LP |
ATS1LX |
|
Mic Input Connector |
3-pin XLRf |
|||
Base Output Connector |
3-pin XLRm |
3-pin XLRm |
5-pin Terminal Block |
5-pin XLRm |
Switch |
Latching on/off |
Programmable on/off, talk/mute |
Programmable with remote capabilities |
Programmable with remote capabilities |
Off (mute) attenuation |
45dB Minimum |
|||
Power Requirements |
11-52V Phantom DC 2mA typical |
|||
Finish |
– |
Matte Black |
||
Length |
160 mm / 6.9 in |
|||
Width |
124 mm / 5.9 in |
|||
Height |
45 mm / 1.8 in |
|||
Weight |
1.4 kgs / 3 lbs |
|||
Closure I/O voltage |
– |
– |
-0.5 to 30 V |
-0.5 to 30 V |
Closure through current |
– |
– |
200mA |
200mA |
On Resistance |
– |
– |
more than 10 ohms |
more than 10 ohms |
1/O leakage Current |
– |
– |
1uA |
1uA |
LED input |
– |
– |
Active when Low (0.4 V DC) TTL Compatible |
Active when Low (0.4 V DC) TTL Compatible |
Error: Contact form not found.