The ADX20iP is a miniaturized condenser microphone used for professional stage and studio applications. The ADX20iP is known for its clarity, excellent transient response, resistance to feedback, SPL handling and ease of operation. The ADX20iP is primarily used for miking saxophone and other brass instruments. The ADX20iP is characterized with a uniformly controlled cardioid polar pattern. This provides excellent isolation and feedback control on stage as well as natural sound reproduction at very close distances. With a smooth and accurate response over a frequency range of 40 Hz – 20 kHz, the ADX20iP is lightweight, compact and simple to use. Housed in an aluminum ring and isolated by means of a rubber shock mount system, the ADX20iP comes with a spring tension gooseneck clip (MC20i) for easy mounting to the bell of an instrument. A number of optional accessories are available which allows for the ADX20iP to be used on a microphone stand for a wider variety of applications. The ADX20iP is designed for use with a standard microphone cable. The ADX20iP operates on phantom voltage of 5-52 Volts and is supplied with a phantom power adapter (APS910), 6’ integrated microphone cable, gooseneck clip (MC20i) and carrying pouch.
SPECIFICATIONS
Transducer Type Pre-Polarized Condenser
Frequency Response 40 Hz – 20 kHz
Polar Pattern Cardioid
Output Impedance 250 ohms
Sensitivity Cardioid – 6 mV / Pa @ 1k Hypercardioid – 5.6 mV / Pa @1k
Equivalent Noise Level <29 dB (A-weighted)
Signal to Noise Ratio >65 dB
Maximum SPL ≥135 dB
Power Requirements 9-52 V phantom
Connector Shielded 6’ terminating to a miniature 3 pin XLRf
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials / Finish Machined Brass Capsule / Black
Weight 48 g / 1.7 oz
Length 29 mm / 1.14 in
Error: Contact form not found.