The ADX series is a professional miniature gooseneck condenser microphone designed for applications such as podium, presentation, meetings and teleconferencing.
With a uniformly controlled cardioid polar pattern, the ADX12 & ADX18 helps isolate the speaker from ambient noise. The ADX series is available in a hypercardioid polar pattern for tighter pick-up control.
The ADX series is designed with an integrated preamp circuitry built into the base of the XLR. They can be mounted permanently via the supplied flange mount or with an optional base with an internal shock mount (see model ATS10, ATS1, ATS1L). The microphone may also be used on a standard microphone stand using the DCLIP snap to fit microphone holder.
Transducer Type Pre-Polarized Condenser
Frequency Response 40 Hz – 18 kHz
Polar Pattern Cardioid/Hypercardiod
Output Impedance 150 ohms
Sensitivity 24 mV (C) / Pa @ 1k
30 mV (HC) / Pa @ 1k
Equivalent Noise Level 28 dB (A weighted)
Signal to Noise Ratio 66 dB
Maximum SPL ≥120 dB
Power Requirements 18 – 52 Volts phantom
Connector 3-pin XLRm
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish Machined Aluminum / Black
Weight 113 g / 4 oz (ADX12)
159 g / 5.6 oz (ADX18)
Length 403 mm / 16 in (ADX12)
558 mm / 22 in (ADX18)