How to keep the tungsten look and add beautiful colours?
The warm white and RGBW LEDs of the P1 mini LED let you create a wide range of colours to your own specification, while seven LED filaments keep the classic tungsten look.
Smaller and lighter than the P1, it installs easily on any tripod or hangs from any clamp.
Key features
- 7 x LED filament with a tungsten look, 7 x RGBW glow
- 16-bit dimming, built-in electronics
- 5 DMX modes (19-50 channels), RDM, macros
- W-DMX as an option, can be added at any time
- Gold reflector as standard, silver reflector as an option
- Discontinued by Portman
Specifications
| Dimensions (H x W x D) | 63 x 76 x 17 cm (24.8 x 30 x 6.7 in) |
| Weight | 8 kg (17.5 lbs) |
| Light sources | 7 x LED filament (tungsten look); 7 x RGBW glow |
| Colour temperature | 1800 K white; RGBW glow |
| CRI | >90 |
| Optics | High-reflective hammered reflector (gold standard, silver optional) |
| Power consumption | max 95 W |
| Input voltage | 110-230 V, 50/60 Hz |
| Power connector | PowerCON TRUE1 in / thru |
| Control connector | 5-pin XLR in / out |
| Control features | 5 DMX modes (19-50 DMX channels), RDM, macros, W-DMX (optional) |
| User interface | High-contrast LCD display, highlighted buttons |
| Rigging | 12 mm (1/2 in) hole for spigot or clamp |
| Mounting position | Any |
| IP rating | IP20 (indoor) |
| Warranty | 24 months |
| What's in the box | Fixture, 2 m power cord (PowerCON TRUE1 to no plug), user manual |
User manual and DMX chart: see Downloads. Fixture libraries and firmware: Portman support portal.
لا توجد تقييمات بعد.